Tuesday, May 13, 2008

Switch Your Hot-Tub to Hydrogen Peroxide

The drawbacks of traditional chlorine-based (bromide) Hot-Tub water sanitization methods are legion; the necessary chemicals are expensive, complicated, smelly, and really drying to the skin. But with a little pre-planning you can sanitize your Hot-Tub water with Hydrogen Peroxide (H2O2) instead of all those other chemicals. Save money, save your skin, and save having to perform all sorts of unnecessarily complicated water treatments.

I recently switched our 1558 Liter (410 US Gallon) Coast Hot-Tub over to Hydrogen Peroxide and I couldn't be happier with the results. The tub is easier to maintain, doesn't have that 'chemically smell' it used to have, and my entire family noticed being in the Hot-Tub no longer dries out their skin but leaves it feeling smooth and soft. We'll never go back to chlorine!

Now, Hydrogen Peroxide won't be an option for you if you don't get your water from a municipal water supply that chlorinates it. So if you get your water from a well or directly from a lake or river WITHOUT chlorination you'll have to stick with bromide. But the relatively low levels of chlorination provided by virtually all municipal water supplies is adequate and, since most people are on municipal water, Hydrogen Peroxide is an alternative for almost all Hot-Tub owners.

WHAT YOU WILL NEED
- 35% Technical Grade Hydrogen Peroxide
- Polyethylene Containers for Hydrogen Peroxide
- Hydrogen Peroxide Test Strips
- Clean Hot-Tub Filter(s)
- Glass measuring cup - 250 Ml (1 cup)
- Protective Gloves and Eye-wear

Obviously you'll need Hydrogen Peroxide. It is available in various concentrations and grades but for Hot-Tub use we want 35% Technical Grade. Depending on where you live, getting it can be tricky. I live in Kitchener, Ontario, Canada and, fortunately, in the neighboring city of Guelph there is a supplier who not only sells 35% Technical Grade Hydrogen Peroxide and all of the other supplies I need but offers free delivery to my area. In fact, Bob Simpson of SUPERFAST SOLUTIONS (www.superfastsolutions.com) has been a terrific source of information as well. If you aren't fortunate enough to live in Bob's delivery area try doing a web search for Hydrogen Peroxide suppliers in your area, you might get lucky and find Bob's counterpart near you. If not, you can investigate shipping your supplies from somewhere else, but the shipping charges will put your costs up a bit.

The minimum quantity of 35% Technical Grade Hydrogen Peroxide that Bob sells is 20 Liters (5 US Gallons). It costs me CDN$60 and, for a Hot-Tub our size, I figure is about a one year supply. Although the Hydrogen Peroxide comes in a blue polyethylene container with an attachable spigot, it weighs 26 KG (57 Lbs) and that seemed rather unwieldy to me so I also ordered five 4.5 Liter (1 US Gallon) polyethylene jugs for storage.

Hydrogen Peroxide Test Strips are plastic strips with a reactive pad on one end, similar to the test strips you are probably using currently to check Chlorine, Alkalinity and pH levels. The strips measure Hydrogen Peroxide from 0 to 100 parts per million (PPM). Bob sells me test strips for CDN$40 for a 50 pack.

When you first start using Hydrogen Peroxide, organic material that has accumulated in your Hot-Tub's pipes, pumps and tubes are going to circulate so starting out with a clean filter is advisable. Be prepared to replace or clean it frequently, at least at first.

You'll need to measure the Hydrogen Peroxide and since glass is non-reactive to it, a glass measuring cup is a good choice. And protective gloves and eye-wear should always be used when handling corrosive materials.

SHOCKING
Though Hydrogen Peroxide can exist quite safely in water already treated by chlorine, bromide and the other chemicals I was already using, to enjoy the benefit of unclouded, fresh-smelling, non-drying water I chose to make the switch when I was planning to replace the Hot-Tub water and I strongly suggest you do the same.

Once you've drained and refilled your Hot-Tub (and put in a clean filter), shock it by adding 250 ml (1 cup) of Hydrogen Peroxide for every 1000 liters (250 US Gallons) of water.

Let the Hot-Tub stand for one day with the circulation pump running intermittently. After that, check your filter and clean or replace it as necessary.

MAINTENANCE
Use the test strips frequently to check the level of Hydrogen Peroxide until you pick up the pattern of how much Hydrogen Peroxide to add and when to add it. Check at least once per week after that.

When the level drops below 50 PPM add 250 ml (1 cup) of Hydrogen Peroxide per 2000 Liters (500 US Gallons) of water in the tub - this is half the quantity you used to originally shock the water.

Maintain the level between 50 and 100 PPM (it isn't dangerous to exceed 100 PPM but it is unnecessary).

Remember to check and clean or replace the filter frequently.

SAFETY AND STORAGE TIPS
Undiluted 35% Hydrogen Peroxide is corrosive, toxic and can be fatal if swallowed. Keep it out of the reach of children and never use unlabeled or improperly labeled containers. Use child-proof caps on all containers. I used an indelible ink marker to label my storage jugs: "DANGER! H2O2 - DO NOT TOUCH".

Hydrogen Peroxide also reacts to sunlight and becomes more active at higher temperatures so store it in a cool dark place. I put my supply on a bottom shelf in the basement on top of a plastic sheet. The shelf is behind a door and I installed a hasp and lock on the door for additional security. I also keep the measuring cup, gloves and safety glasses on the same shelf and I only measure the Hydrogen Peroxide outside when I am about to add it to the Hot-Tub.

If you accidentally spill it on skin, flush the area immediately with running water. If it is accidentally swallowed, drink large quantities of water, remain upright and call a doctor or poison control agency at once.

In case of accidental spillage, flush the area with water to dilute. Don't return any spilled Hydrogen Peroxide to its container and keep undiluted Hydrogen Peroxide from going into the sewage system. Report any spills as required by Federal, Provincial/State or local regulations.

If you are using a spigot to dispense Hydrogen Peroxide leave it in place until the container is empty. Removing and replacing the spigot can cause lint or dust to contaminate it.

With a little pre-planning and some common sense you can safely switch your Hot-Tub water sanitization over to Hydrogen Peroxide and not only save money on the multitude of expensive chemicals you are currently using but also have an over-all better Hot-Tubbing experience.

276 comments:

1 – 200 of 276   Newer›   Newest»
Mike said...

Hey Bill,

Thanks for a great article. I'm writing to you from the Okanagan, BC. A search on alternative methods to maintain hot tubs led me to your blog.

My situation is as follows: My wife and I take possession of a home that has a 2 year old hot tub. Of course, we want to drain the tub, scrub it down, change the filters, and then use the 35% hydrogen peroxide method to maintain it.

Interestingly, but not surprisingly, all of the 12 suppliers I've called today neither carry HP for tub maintenance, and all of their reps advised against it. When questioned the best answer I could get was "I just don't think it's a good idea". I have similar thoughts about bromine and chlorine. In trying to reduce putting unnecessary toxins in our bodies, your method is very appealing.

My question is, what is the best way to approach this used tub? One rep said we need to refill and use chlorine to at least shock the tub once a week. Would you be able to lend your experience here and let me know a step-by-step plan to start the tub off right? Of course, we would then maintain it with the FGHP (hoping we can find it out here). We may need to order it from your supplier in Ontario.
Thanks so much for your time.

Warm regards-
Mike

Bill Clarke said...

Hey Mike,

The first question I would have: Is your water supply chlorinated? If so, no problem. If not, big problem. The problem being algae.

You see, even the modest levels of chlorination present in municipal water supplies does an effective job of preventing algae growth. Some people (even some chemists) think that H2O2 won`t attack algae - that isn`t true. Algae is an organic material and Hydrogen Peroxide will attack it, but because H2O2 sanitizes by oxidizing (releasing its -relatively unstable- extra oxygen molecule) it will deplete itself in the process and you will find yourself adding Hydrogen Peroxide constantly (daily) to maintain 50 - 100 PPM. That`s the reason why clean filters are so important for this method. The constant presence of organic material depletes Hydrogen Peroxide and converts it to water; you want to keep the presence of organic material to a minimum.

If your water supply isn`t chlorinated then the rep who advised you to shock the tub with bromide/chlorine is right - although it will defeat your purpose in switching over to H2O2.

I suppose you could investigate chlorinating your entire water supply as an alternative but, since my water supply is already chlorinated, I have no idea what the cost/procedure would involve.

If your water supply is chlorinated I see no problem - just follow the steps I outlined in my article. Clean the tub as thoroughly as you can, have extra new (or, at least, clean) filters on hand and double up the maintence dosage of H2O2 as an initial shock and let it stand for one day with the pump running (sporadically).

I would anticipate no problems with a tub as recent as two years old (our tub is over five years old and handled the change-over beautifully.)

Before you pay the (likely substantial) shipping charges to have Hydrogen Peroxide sent from Ontario to BC, investigate local farm supply businesses. Those who deal with water treatment for greenhouses, vegetable production and processing, irrigation and wastewater treatment will likely sell 35% Technical Grade Hydrogen Peroxide. Failing that, you might investigate local food processing suppliers for 35% Food Grade Hydrogen Peroxide. It will cost more than Technical Grade (and isn`t strictly necessary) but the difference in cost will likely be less than the cost of shipping.

I applaud your decision to investigate alternatives to chlorine/bromide for your hot-tub and I really hope you can work out the kinks. Please keep me apprised of how you get on.

Bill.

Anonymous said...

I started using H202 about a month ago. Have had great results so far. I've bought my 35% Tech grade from ClearTech chemicals. I also bought some hydrogen test strips 0- 100 ppm. When I tested my water in the hot tub the strip turned black. Bill do you have any idea why that happened. Should I be concerned? I've been adding about a cup per week since I 've started.

Bill Clarke said...

Assuming your strips work the same way mine do (that is - the darker the colour, the higher the concentration of H2O2)that suggests to me that your H2O2 level is above 100 PPM.

It would be surprising for this to consistently be the case if you are only adding 1 cup per week.

I suggest that you draw a quantity of water (a litre or so) out of the tub in a glass or polyethylene container and add a small amount of some organic material - a teaspoon of dirt perhaps - leave it for a day or so then test the sample. Then leave it for another day or so and test it again.

The colour of the testing strips should lighten with successive tests as the H2O2 depletes itself.

If it doesn't there are two possibilities - either the level of H2O2 is incredibly high or the test strips are defective. But I'm betting that you'll see the colour lighten.

Assuming that it does, stop adding H2O2 to your tub until the level returns to between 50 and 100 PPM and only add H2O2 when the level drops below 50 PPM and only enough to raise it back up to 100 PPM (try adding smaller quantities than 1 cup until you get a 'read' on it).

If the test strips continue to turn black when testing your separated out sample, try testing a litre or so of your tap water - it shouldn't have any H2O2 present and if the strips indicate that it does then something is wrong with the strips.

I realize that you'll end up using a fair number of strips in this process and they aren't cheap (mine work out to about a buck apiece) but you're going to have to get to the bottom of this.

Good luck and let me know what happens.

Anonymous said...

Thanks Bill for your comments. I'll be away for a few days so when I get back I'll test my water again with the strips and let you know the results.

Anonymous said...

Bill you were right the levels were to high. I just checked my tub tonight after not adding any peroxide for a week and it was bang on the 100ppm color.

Thanks for your suggestion & help.

Gary

Bill Clarke said...

Great, Gary.

Enjoy healthier hot-tubbing!

Bill.

Anonymous said...

Gary here again. Bill after about a month & a half my water is scumming. Does this mean the water should changed and is that about the life expectancy using hydrogen peroxide in my hot tub? Comments please.
Thanks Gary

Bill Clarke said...

Hi Gary,

I get about three months between water changes and haven't had a problem with scumming. I wonder if this might be a hard water problem - is your water particularly hard? Do you have a softener? Did this ever occur before you switched to H2O2?

Hard water can also cause a problem with the plastic components of your tub - do you find that you've had to replace any of the plastic jet inserts?

Also, check (and clean or replace) your filter(s). The scumming may be the residue of overactive breakdown of organics from the previous high levels of H2O2 you were experiencing - maybe your filter(s) couldn't keep up.

Does the water smell?

Bill.

Anonymous said...

The water I'm using is from my outside tap which would be hard. Thiscnever happened before I switched to H2O2. Did'nt have to replace plastic jet inserts. Filters are new. Last time used when I opened the lid, water was scummy and when people were in it it caused them to cough.

Bill Clarke said...

Wow Gary, I'm stumped. Maybe you should drain it and start over - certainly don't use it in its present state if it causes such a reaction.

Although it sounds like you do have hard water if you haven't had this problem before then that likely isn't the cause. And I can't imagine a hard water residue causing people to cough.

I can't shake the idea that because your H2O2 levels were so high for awhile that the scumming is related to that - like some organic matter was oxidizing for a long time and the scumming is the residue. But clean filters seem to contradict this notion. Nothing present in the trap? Nothing in the filters? Geez, I'm out of ideas.

All I can really suggest is drain it, clean it thoroughly, shock it with H2O2 and check the levels - don't let them get too high again. And see if the problem returns.

Cold comfort, I know.

Maybe there's someone at ClearTech chemicals you could consult?

Or (though I haven't asked him) you might consider getting in touch with Bob Simpson of SUPERFAST SOLUTIONS (www.superfastsolutions.com - his email address is on the site) He's the guy I buy my supplies from and is quite knowledgeable.

I'm sorry I'm not being more helpful but don't give up on H2O2 yet.

Bill.

Anonymous said...

Bill:
I have seen this peroxide method and I am very curious.
We have a hot tub that I am about to get up and running that has been sitting for 2 years.
So I just want to be clear on this method....do I still have to use all those other chemicals and tests (ph)as well as the peroxide. Or will I only the peroxide? I use to use bromine and all those other potions of chemicals for maintain our tub.
I live on the Sunshine Coast in BC and our water is from an artisian well, will this make a difference?
Thanks
Brenda

Bill Clarke said...

Hi Brenda,

The problem is your water source. You will need some level of chlorination to combat algae growth, without it you will be constantly replenishing the H2O2 as it gets used up trying to kill the algae.

If you can chlorinate your water sufficiently enough to prevent algae then I would think you can use H2O2 (they can co-exist without interaction). But if you are chlorinating anyway (by bromide or some other method) there really isn't much reason to add H2O2.

In short, I think you're stuck with the traditional methods.

Anonymous said...

Hi, I too am using peroxide for my hot tub. I live in the Niagara area and my hot tub dealer sells it here. Currently I am having some difficulties with the water, but I think I've found the solution. We were told to add a tablespoon of easy shock once a week along with a liter of 35% peroxide solution and after 8 weeks our water turned a very slight green and I believe we have been adding way too much. So yesterday I rinsed and replaced the filter twice and again today, I have left the lid off and rinsed and replaced filter 2 more times. The water is getting back to normal. If I am successful in saving the water, i am going to just wait until my test strips tell me to add peroxide. Oh, one more thing, you are paying way too much for test strips, there is a place near you that you can call and order them for about $15.00 for 50. Here is the linky.

http://www.indigo.com/test-strips/gph-test-strips/peroxide-test-strips.html

Bob

Elroy said...

Hi Bill:I see the article from Gary to do with coughing on the tub fumes.I wonder what his PH levels are? My tub does the same when my ph is out of whack for a while. I have a question too as I am on well water and would like to try peroxide. What's the difference of filling the tub with treated water, or treating it once with bromine? Chlorine only lasts for 24hrs not? Then treat with chlorine when you fill or topup? Why wouldn't this be safe ?

Bill Clarke said...

Bob - thank you for the link, I will certainly look into that as paying almost a buck per strip seems too high to me, too.

elroy - I don't see any problem with chlorinating the water (with bromide or by some other method) H2O2 will not negatively interact with traditional spa chemicals - but some of the advantages of H2O2 will be lost. Once the chlorination in your water is depleted you risk algae showing up and depletion of your H2O2 as it combats it.

If you have a supply of H2O2 you can certainly try and see if it works for you. If not, you can return to traditional methods.

Anonymous said...

Hi Bill, I was unsuccessful in saving my water. Over the weekend, it just didn't look right. We had a milky scum forming in the filter compartment and the water turned a florencent green colour. So we drained and cleaned it and have started over with your method. Will let you know how it goes.

Thanks,
Bob

Bill Clarke said...

Hi Bob,

Sorry to hear that but it's probably just as well - this way you can be more confident of the water's safety before trusting your family's health with it.

You mentioned that your hot-tub dealer sells H2O2 - in my experience, that's unusual but I applaud them for doing it. Are they are good source of information about it?

Bill.

Anonymous said...

Hi Bill, our hot tub dealer has been very helpful in trying to find a solution. But they are very new to the whole thing too and are experiencing the exact same results that we have. So we are trying to work together to figure it out. When we purchased our hot tub a few months ago, we had decided right away that we didn't want to use chlorine or bromine and we really want this peroxide to work. So we'll keep plugging away and see if we can keep things clear.

Bob.

Anonymous said...

HI Bill, Well, it turned green again, yesterday afternoon. So i left the lid open again and rinsed the filters and ran the jets three times, it cleared and we used it last night. Then this morning again it was a clear floresent green. So I called Bob from simplesolutions. He was very nice and asked me to check ph. While on the phone with him. It was off the charts way too high. He suggested vinegar to lower ph. I added a liter at a time and retested water. After 2 liters it appears to be ok. He said he will be down here today and i could call him if i needed to try some citric acid. Will check water again mid afternoon. I called my dealer and she is very interested to see if this works because almost every customer here is experiencing the same problem. The saga continues.....will keep you posted. Thanks, this time from Bob's wife Justine.

Bill Clarke said...

Justine and Bob,

Vinegar or citric acid to lower pH - leave it to Bob Simpson to come up with such an elegant and natural solution!

Bob is a real treasure; I count myself lucky to have found him as I'm sure you do, too.

Interestingly, I've never had this problem but it's good to know there's a 'natural' solution. Please keep me posted.

Bill

Anonymous said...

HOO BOYYY, i rechecked my measuring cup and it was a total of 8 cups of vinegar added. Seemed great last night, but a recheck of pH this morning showed a drop to the lowest range on the chart, so I went off looking for a solution and most suggested sodium bicarbonate, my only household resource today was baking powder, so i added 3/4 dry ounce, retested pH and it is completely fine. I think this is going to be a hit and miss game for a while. My peroxide strip is still black, my only add of peroxide was last Sunday when i added 800ml as a start up. It is very nice to know that these simple things work. And the water is so clear! Have a great weekend, hoping to get some golf in. Thanks for all your help Bill, we will keep you posted.

Justine.

Anonymous said...

Hi Bill, can you tell me when you start up using H2O2 do you still add the calcium and alkalinity to the tub as well? Wht should the pH Be? I have a 1500 litre tub and would like to convert Please help

Ray

Bill Clarke said...

Hi Ray - I assume you are using calcium to combat water hardness. I fill my tub with half softened water (from the softener) and half non-softened water (from a bypass tap). I try to avoid having the water too soft as this can result in calcium buildup on the plastic parts. So the short answer is likely: Yes, keeping using calcium but don't overdo it.

I don't do anything about alkalinity or pH - perhaps I've just been lucky but I haven't had any issues about this.

Another person posting comments here indicated that he is successfully using vinegar and/or baking powder to control pH. If you are concerned about it I suggest you continue to test it and try using those (more natural) products to maintain your chosen balance.

Personally, I just don't worry about it and it hasn't been an issue.

Anonymous said...

Hi Bill, thanks for the comments, I use municipal water so I am not too worried about the calcium or hardnest. I tried your recipe and still get no residual on the test strips, I also have a coast spa the Tahiti model, do I just keep adding the H2O2? until I do get some residual. My pH is really low below 5.6 so I don't think that's a problem. Thanks again

Ray

Bill Clarke said...

Ray - I'm not sure what you mean by "residual". With a 1500 litre tub your initial "shock" should be 375 mls of 35% H2O2. If you shocked it at that level and left it circulate for a day then tested it your test should indicate between 50 and 100 PPM (likely closer to 100 PPM).

If that is NOT happening, three possibilities come to mind:

1- you've miscalculated the capacity of your tub, or
2- your H2O2 supply is not at the proper strength (35%), or
3- some organic material is present in the water and is depleting your H2O2 at a rapid rate.

Of the three, I would first suspect #2 - improper strength of H2O2.

Hope this helps.
Bill

Anonymous said...

Hi Bill, I have confirmed the hot tub size it is 1450 litres, the H2O2 is 35% stock and the water is clear as a bell. When I add H2O2 then use a test strip it shows dark blue or black right away. Could it be the H2O2 is reacting to the debris bound in the filter? I have two filters that have been washed and cycled through for the last 8 years, they look OK perhaps it's time to change? I just added another 8 ozs so that will bring it up to 22 oz over the last three days. I will let you know if I finaly get a reading on the test strips(residual)Another thought we use a blue bubble blanket to keep the top from being erroded away by the chemicals could it be that? question quuestions and more questions.

Thanks for all your patience

Ray

Bill Clarke said...

Ray - if your test strips are dark blue to black they are indicating that the H2O2 content is at or above 100 PPM (assuming they work the same way mine do and I suspect they do) I think you'd best slow down on adding any more - you want to maintain the level at 50 to 100 PPM.

Your re-cycled filters may be just fine - see how quickly the H2O2 level drops for a better indication of this.

So long as the bubble top is not in contact with the tub water or causing material to drop into the tub water I don't think it will interfere with the H2O2. I assume the top to the tub is opaque; sunlight will hasten the degradation of H2O2.

Bill.

Bill Clarke said...
This comment has been removed by the author.
Anonymous said...

Thanks Bill, I will let you know what happens. The bubble blanket is in addition to the top, but it should not be an issue. I have ordered additional strips so they should be here in a couple of days.

Ray

Anonymous said...

You write very well.

Anonymous said...

Hi Bill,
I have been trying to use H2o2 in my 1400 L hot tub on and off for a few months...I have the same problem as Justine and Bob had with the water turning an acid green after the water is a couple of weeks old. I am assuming that it is a form of algae. Just wondering if you have any more updates or info on how much baking soda/vinegar to add to adjust the ph level. I have read different things saying the baking soda raises both the alkalinity and ph... I am changing my water and going to check the ph and alkalinity levels carefully and see if that makes a difference. Also my Dad had a company near Midland, ON that supplys H202 and his theory is that if I just use more (maybe a couple of cups a week) that the peroxide will be more effective in controlling algae. Any thoughts? I would like to get everything figured out so that I don't have to change the water again for a couple of months when we get a warmish day!
Thanks,
Michelle

Bill Clarke said...

Hi Michelle,

I don't have any further info on the use of baking soda/vinegar but if you are correct that what you are experiencing is a form of algae then I don't think pH is your problem.

If it is algae then your Dad is right - additional H2O2 will combat it. The problem is you will have to continue to use higher amounts of H2O2 to continue to combat it.

If it is algae something needs to change to prevent the algae from occurring in the first place.

Is your water chlorinated?

If not, algae will continue to be a problem and you will use up H2O2 at a high rate combating it. If your water is chlorinated then the problem probably isn't algae.

Homes without chlorinated water are not good candidates for using H2O2.

Bill.

Anonymous said...

Thanks Bill,
Nope...Our water is chlorinated so that is not the problem. I changed the water yesterday and added two cups of H2O2. Now in a couple of days I am going to use a test strip to see if the ph and alkalinity are ok and also test to see if the H2O2 is ok. It always takes a couple of weeks and then starts to slowly get a greenish tinge to it. Couldn't people on well water use a little bit of chlorine but mostly peroxide? I have heard of people who use H2O2 that are going away for a couple of weeks and just use a bit of chlorine to tide them over so I think it is safe/effective to use them together. I will let you know how I make out in a few days. If I can't get a handle on it this time I figure I will change the water one more time and put chlorine in and then try again in the spring. I really want to use H2O2 as my husband breaks out in a nasty rash from anything else and am fully aware of the health benefits of bathing in H2O2.
Thanks again,
Michelle

Anonymous said...

Hi Bill......
I have been using peroxide in my hot tub for over a year now. I would like to share some of my experiences with you. All of the things that I have read here so far are true..... no bromine smell..... my skin is really soft with no bromine rash...... bathing suits do not fade...etc, etc,. A few things that I now do differently since changing from Bromine..... Change filter EVERY week. Soak filter in solution of approx 17% ppm peroxide overnight.(I have 2 filters so that my tub is never out of action)If my kids use the tub and they have creams and lotions on...doesn't every teenager.... then I add additional peroxide. If I don't, then the water can get a little cloudy - even though the ppm is around 100. When this happens, I add a Clarifier and Oxidizer.... (Rhona)run the pump for an hour then change the filter.... presto-changeo.....clear water again.

Changing from bromine to peroxide in our hot tub is the best thing that we have done since getting it several years ago.

Have Fun
Alan

Anonymous said...

Hello All. Bill thanks for all of you efforts. Bob from simplesolutions is great to deal with and delivers all over southern Ontario.
I wanted to relay some of my experiences.
I use municipal water, and I have been away and had my PPM drop off scale low for a few days. the result was foul smelling cloudy water)I simply would shock the tub with H2O2 and change the filter. also the next day I shock it with 1/4 cup of spa chlorine shock ( I use beachcomber cafreffree boost)
keep an eye on the H2O2 and frequent filter changes. it is back to crystal clear, odor free in about 4 days. One tip. if your hot tub goes bad on you. CLEAN AND DISSINFECT your cover with a solution of H2O2, or else it may be a constant source of organic contamination.
A co-worker introduced me to H2O2 and he fills his tub up out of a pond on his property!!! can you imagine that? he just shocks it and performs frequent filter changes the first week and then also adds a bit of bromine shock from time to time. he has been doing this for 2 years and never ever had a problem.

PH has never been an issue for either of us.

one funny note.... bathing suits can cause bubbles or foam (from the laundry soap)

I hope this helps some people out there. The H202 has realy made my tub into a SPA!

Regards, Derek

Anonymous said...

Hi everyone,

I'm writing from the Okanagan, and can't seem to find test strips anywhere. Does anyone know of a good online resource that sells them at a good price?

My apologies if this has been discussed already.

Cheers,
Mike

Ryan from Columbus said...

Bill, Read your blog and switched my 450 gallon hotsprings spa over to H202. Everything was great for the first couple months. I had a problem with mold, I added some chlorine to shock the tub in an effort to get rid of the mold smell, but to no avail. Super shocked with cholorine, drained and re-filled. Within a week the smell was back and mold began to grow on the underside of the cover. I have since refilled and went back to the old chlorine chemistry and everything is fine. Is it possible that the residual H2O2 levels were somehow neutralizing the Chlorine? No matter how much chlorine I added the test strips I have would not register any chlorine level. Maybe they were being bleached out by the H202? or perhaps the chlorine was really not there, don't understand the chemistry enough to know. Ideally I would like to continue to use the H202 as a shock oxidizer in conjunction with the chlorine as I have 4 gallons left. Any thoughts?

Thanks,

Ryan in Ohio

Anonymous said...

Bill, I have a problem. I have been using Peroxide for almost a year now and I get a smell that I cannot get rid of. It is a musty smell if I can describe it at all. I went back temporarily to Bromine for 2 months thinking that it was am organic or something built up but since I have changed back it has been 3 weeks almost 4 and the smell is starting to come back. My tub is 1000 litres and I use 1litre of 35% peroxide a week and change my filter that is soaked in 100% peroxide solution at 35% (no water added to it) I am stumped and frustrated cause I do not want to get off the peroxide...I love it, but want to get rid of the smell. I am on city clorinated water and I recently took apart my lid, dried and javex it to get rid of any possible problems there. My tub is a beachcomber and I was wondering if you know of any problems using peroxide in those tubs. My tub is about 4 years old now. HELP I do not want to switch..I like the health benefits. Thanks Tanya

JC said...

Hi Bill,

My wife and I just got a 1200L hot tub and are using h2o2. It's been running a week and so far so good.

Our test strips read from 0-100 ppm and were always black. I found a company that sells strips that read from 0-400 and our levels are closer to 200 then 100. Apparenlty it's not a big deal, but if it only needs to be at 100, why waste chemicals right? I'll still add a bit every 4 days, but will reduce the amount until we get closer to 100 with the odd 'shock' to 200. I've read some sites that say they use a litre of bleach to shock the water. Have you tried this? I'm curious, but don't want to do it if it's not needed.

Our biggest problem right now is the pH in the tub. The dealer didn't say anything to us about testing pH. They just sold us the tub, the h2o2 and the h2o2 test strips. "Add a cup every 4 days and that's all you have to do"

I picked up some pH strips and our readings were off the chart. I've added 12 cups of vinegar over the week and we're sitting close to 7 now. I think we have it under control, but 12 cups of vinegar seems like so much. I'm on town water too.

Great article,

JC

Bill Clarke said...

I don't do anything about alkalinity or pH - maybe I've just been lucky but I haven't had the issues others have reported about this.

Really, all I can suggest is that your pH got out of whack and may take a lot of vinegar to bring back into line but should respond to smaller quantities after that. Trial and error, I guess.

As to bleach - yes, you can use it, there won't be any reaction between it and the H2O2. But you will lose some of the advantages of just peroxide, like the smell.

Unknown said...

Hi bill
I live in Australia and have been using peroxide in our spa for over 5 years now. When we first started using it we found we were changing the water every month, as it was getting cloudy very quick this lasted for around the first 6 to 8months of ownership. we were using it almost daily and I put this down to the peroxide cleaning our skin and the filter not keeping up to it. Now we are still using the spa almost daily, sometimes 2 times a day and find the water only needs changing every 3 months. We shock the water once a week on a Saturday with 2 spoons of spa shock and add a cup of peroxide once a day when we use it. This is probably a little overkill but as I get the peroxide from work this is not a problem. We try to keep the pH at around 7 to 7.5 and add a spoon of sodium bicarbonate around every 2 to 3 weeks to keep these levels. When we first got the spa we used the chlorine/bromine system and found it left us smelly and needing to shower after every use also we found it getting cloudy quick as well, with the peroxide we have no smell and that is a big plus. We cant be happier.
Julian

Erin said...

We have used bromine in our hot tub for years and always had a problem balancing and seemed to go through a lot of chemicals. We heard good things about the hydrogen peroxide method and have just started using it. Our water does come from a well. For the first couple of weeks the water was crystal clear but had a terrible odour. Within the past week the water has become cloudy with the same terrible odour. I have added extra H202 and last night used pH down as the pH was right off the scale. I re-tested this morning and there is no change. I am going to try some of the suggestions on your site but am wondering why well water can't be treated when it is first put in the hot tub to make it comparable to municipal chlorinated water so that we are all working with the same thing. If this is possible, how would you go about doing this? Also - is there anything that can be done about the smell?

Lin said...

Hi Bill
You will be pleased to know that you can purchase the peroxide test strips in Waterloo from a company called Indigo. I paid $14.50 for fifty 0-100ppm strips. The website is www.indigo.com.

Unknown said...

Hi Bill,

Now with the new "restricted component" legislation with respect to 35% HP, I was told I can only get 25%. If I go ahead with the 25%, would I just use a little more each time and get the same effect or should I find another distributer?

Bill Clarke said...

Lin - Thank you - that is good to know.

Mark - as far as I know, the new rules simply mean that you need to provide photo ID - which is no big deal as far as I'm concerned. If you consider it a big deal then - yes, all you need do is increase the quantity of 25% H2O2 - by about 35% I would think (without benefit of a calculator).

Cherie said...

Hello To All!
We finally got ourselves a Hot Tub!! We are planning to use Peroxide also. We have looked all over Niagara Area for someone who sells it. Any suggestions out there?

JC said...

Hi Bill,

We've had our tub just under 2 months and tonight we noticed white fluffy stuff floating around in the tub. I'm guessing that's some kind of algae or bacteria.

We've always had our h2o2 ppm between 100 and 200 and change the filter regulary. We also have an ozonater in the tub and have the water filter for 3hrs four times a day. It's only my wife and I using the tub and I shower 90% of the time before I use it.

I read a site that said you can shock with bleach so dumped about 4 litres of bleach into the tub, put the jets on high (with bubbles) for 5 min with the cover on. I opened the cover just to shut it off and we're going to stay out of it for 48hrs.

The last time I added h2o2 was on Sat Oct 10. We should have been sitting close to 200ppm.

Any idea why this could have happened? I'm in the process of ordering 35% grade h2o2 from Bob in Guelph. I'm hoping this is the right move. I'm a bit dissappointed right now, but don't want to throw in the towel just yet.

Randy said...

Hi Bill
Just in the process of using H2O2 in an older Hot Tub. Wondering about leaving the heating element turned on for the first 24 hours with 2 cups of H2O2 to start the process.

Thanks
Randy from Edmonton

JC said...

Just to give you an update. We couldn't get rid of the white floaty things so we had to drain the tub. Before we did, we bought a chlorine shock and spiked the ppm to ???. (strip only goes to 10 ppm and it was very black)

We ran the jets on high for about 60 min alternating the air on/off.

We drained the tub and hosed the sides down multiple times.

We sprayed the inside of the tub and cover with 5:1 ratio Peroxysan (aka h2o2) and buffed everything dry

We shocked both filters with a high ppm of chlorine as well and rinsed them both multiple times.

We filled the tub again with just hose water this time (nothing from the hot water tank) and added 12 cups of h2o2. (our tub is about 1100L)

We checked the tub today and we had balls of white crud floating around in the tub. I'm guessing it was in the pipes. Our dealer advised us to pour in another 12 cups of h2o2. (that's $50 worth for what I get it at)

I changed the filter and am hoping that the floaters are just dead remains.

Our h2o2 ppm is about 400 right now.

If we still have these things by the end of the week, we're going to switch to bromine. As much as I love not smelling the chemicals, I can't bath in a pool of snot.

Anonymous said...

Hi Bill - great advice - you rock man. Can you see any issue with adding a teaspoon of Cl shock to the well water in my tub from time to time in conjunction with the H2O2, to help fight algae growth ?
Also , anyone know of a decent locale to but tech grade 35% H@O2 in / near Halifax ?
Cheers
Steve and Licia 902-237-0611

Unknown said...

Hi Bill Great Blog, Came across this while searching an alternative to chlorine / Bromine. I seem to have an allergic reaction to both i've tried a few solutions nothing works seems im allergic to something in chrlorine. I'd like to try the H2O2 solution but I live just north of Guelph and my water is from a well? I do have a Clear Tech UV sanitizer installed as well in my attempt to cut back on chlorine. Any suggestions you have would be appreciated.

Thanks

John

Bill Clarke said...

Wow - I go away for a little while and the comments pile up!

John - really all I can suggest is that you try it out. My understanding is that unchlorinated water will tend to produce algae and that H2O2 will deplete quickly fighting the algae but if your sanitizer prevents alge then you may be okay.

You may want to have a word with Bob Simpson at SUPERFAST SOLUTIONS (www.superfastsolutions.com) - coincidentally, he's in Guelph and is a really knowledgeable and helpful guy.

Now - nothing to do with H2O2 usage but we have gotten rid of our Hot-Tub. Long story but basically we ended up with a piece of garbage pump as part of a recall and rather than replace it we decided to get rid of the tub. We will purchase a new tub at some point in the future but for now we are without one.

I do have quite a bit of H202 left over so if someone (like you, John) in the vicinity would like it, it's yours for the taking - drop me a note and we'll set up a time for you to pick it up.

Brooke said...

Hi, I just came across your article and comments this morning and found them very informative. I have just started using H202 to sanitize our tub, but have yet to come across any information on where the levesl of Total Alkalinity / Ph balance should be maintained when using H202 as the sanitizer. Would these be same as chlorine/bromine or different? Any input you might have here would be appreciated. Thanks so much.

Cheers,
Brooke

Perry Staniscia said...

Hi Bill,
I know you no longer have your hot tub but we have been really suffering for the past year & a half with the chlorine system sold to us with our new Beachcomber hot tub and would like to convert to Hydrogen Peroxide. We live in Vancouver, B.C. but my wife is coming to Hamilton March 6th to 9th & she would love to come talk to you to get some pointers that she can bring home with her. Please let me know if you are open to this. Thanks. Perry

Bill Clarke said...

Perry,

I would be perfectly fine with that but, at this point, I have no idea if I will be around or not from March 6th to 9th. Also, I'm about an hour away from Hamilton and there's no real advantage to your wife coming here since the hot tub is gone and there's nothing to see. I don't know how much more I can tell you/her than what is written in the article and the comments.

I think a phone call might make more sense - drop me a safe email address and I'll send you my cell number.

Bill

Jefferey said...

does using a non conventional sanitizer like H202 void your manufacturer's warranty?

Bill Clarke said...

Jefferey - In all probability, YES - please check with your tub manufacturer BEFORE using H2O2.

Jefferey said...

would that be worth it though?
My tub has a 7 year warranty, its only 9 months old... i wouldn't want to do it if i end up needing warranty work and cant get it cuz i used a non conventional sanitizer.

Bill Clarke said...

If it does indeed void your warranty then I wouldn't consider it - I know from personal experience that things like replacement pumps are very expensive. You really need to check with you tub manufacturer. There is no reason is should void the warranty but tub manufacturers may want the excuse to void it.

Jacque Moore said...

We are getting a new beachcomber hot tub. We live in a town with municipal water. I will be using peroxide and their test strips. Do I need to balance PH and alklinity etc.? And if so, how often?
I have learned a lot from your site and I appreciate it being made available to the public.

Jacque

Bill Clarke said...

Jacque,

Although I never had an issue with pH or alkalinity, if you read through the comments here you'll see that some people have experienced problems and the solution seems to be vinegar or citric acid. You can check other people's comments for guidance as to quantities but I suspect you'll end up using the 'trial and error' method to determine the best amounts for your situation.

Cathy said...

My local supplier of 35% H2O2 (Vernon, BC)has just informed me that it is now illegal to sell that percentage anywhere in Canada. All I can get is 29%. Not happy at all about this--any suggestions? Do I just use more, relatively? I've been using H2O2 very successfully in my hot tub for 2 years.

Bill Clarke said...

Cathy,
I hadn't heard that you can't buy 35% solution - only that you have to show government ID when you do (which seemed fine to me). However, a quick calculation indicates that if you increase the quantity of 29% solution by 20% that should be equivalent to using 35% solution.

Of course, if your supplier charges the same for 29% solution then you will notice an increase in expense.

Bill.

Cathy said...

Hi Bill--

Thanks so much. That calculation will help. I'll check back with the supplier--the ID thing certainly is reasonable; they seemed to say they couldn't even get the 35% in, which may just be their choice. Happily, the cost of 29% is less, so price-wise it'll end up around the same, I think.
Cathy

Wendy said...

As of June 2010 the 3 companies I have talked with in Ontario indicate that there has been a shift in regulations in Canada and they need a special permit to sell the 35%. However 35% still is being sold, but normally through agriculture stores- we have a farm so I would have no problem purchasing the 35%. The pool store in Barrie Ontario now carreis 25% for a little more then what we paid for the 35% LOL However, now they don't need a permit and I need to buy more of it...no big deal, I just use the test strips to determine how much the pool needs. We even use it for shocking in the spring and it works awesome. We also use it with www.algaebar.com and we haven't 'lost' the pool once in 3 years and to be honest we don't vacuum as often as we should! LOL We used 2 algae bars in our round 24' pool but now we use 3 in our 16'x32' on ground ;-) The perioxide it is still affordable and convenient to go to the pool store to get it. I don't want to have to order a skid of h202 to my house! LOL hope that helps ;-)

Unknown said...

Well I bit the bullet and I am so glad I did. Just bought a new 450 gal tub and decided to start it up new with H2O2. Filled the tub, checked alkalinity and ph then it took me a while to get up the nerve to dump the required 1.75 cups of H2O2 into the water. I wasn't sure why I was hesitating but what if something were to go wrong????
Well it didn't. I am also running a Sundance Spa Mineral/silver ion pack in the filter basket. The water is nothing short of fantastic. Wow!!!! Should have done this a long time ago. No smell to the water and no irritation or drying of the skin. It is so great to hop out of the tub, dry off and jump under the covers and go to bed. No more trying to rinse chemicals off before bedtime.
Thank you for the push to convert my tub. I will never go back to the old methods.
Any of you on the fence just jump right off and get started. It will be the best thing you will ever do with your tub.

Cheers

Gary said...

Hi Bill: I live in Kitchener and I switched my 1500 Litre hot tub to H2O2 at the time of an early September fill with city water. I put in a new filter and change it out with a 2nd cleaned one frequently and continue to balance ph. However, 6 weeks latter I am struggling to keep the water crystal clear even with minimal use. Am I lacking in Chlorine? I tried putting a couple Bromine pucks in the skimmer after a new filter and I got a week out of 2 cups of H2O2. However, one week later it is back to consuming H2O2 at the rate of 2 cups a day (OUCH $$). NOTE: I also like my hot tub hotter than most – 105 F. Any suggestion would be most appreciated.

hot tub accessories said...

This blog is very nice.Looking for quality hot tub accessories? Arctic Spas Red Deer specializes in hot tub accessories in Alberta.

Gary said...

Hi Bill and fellow bloggers: Further to my October 4, 2010 posting.....I am happy to report that I have finally optimized my use of H2O2 by placing a single Bromine puck in the skimmer once a week and maintaining clean filters. I easily get a week out of 2 cups of H2O2 in my 1500 Litre Beachcomber tube.

P.S. The following is a direct quote from Development Center Manager Beachcomber Hot Tubs: “Using Peroxide would not void any of your hot tub guarantee however; as for using peroxide in general, Peroxide is not registered with the PMRA as a hot tub sanitizer. In Canada you need to maintain a Chlorine or Bromine level of 3 – 5 ppm at all times and peroxide does not do that. Beachcomber believes that using peroxide alone; the water will not be maintained correctly for a safe bathing environment.”

chuck said...

Hello Bill, I have never blogged before so I hope I am doing it right. I wanted to cnnect with the Mike fellow how blogged earlier. he lives in the Okanagan. We live in Vernon and I cannot find anyone who sells the 35% h202. All I can get is the 29% stuff from a local nursery. I have been using it, but am only guessing at what percentage I need to be using. I have a 1370 litre tank. Neither ofr the local hot tub places are keen or helpful on using hp. My wife has very sensitive skin and this way seems to be helping her.
Any help adivce or sources you could help me with would be appreicated.

Bill Clarke said...

Chuck,

I have no way of contacting Mike, sorry. Email addresses are not sent to the blogger when people comment.

If you can only get 29% H2O2 you need to increase the amount you use by 35%. So for a tub your size that would be 1.85 cups of H2O2 for shocking and .9 cups for maintenance - I'd just call it 2 cups for shocking and 1 cup for maintenance.

But really the best thing is to be guided by your test stips - add the amount of H2O2 you require to maintain the level between 50 and 100 ppm.

Marty Schaap said...

Hi Bill, love the site, and because of it, I made the switch to HP. I'm in Montreal, and I have a great supplier of 35% and it costs me less than $60 for a 20L container. I keep 1L bottles and 250ml prepared doses (about a dozen of them) in a spare freezer.
We've been using the HP for about a month now, and the first 2 weeks were just getting used to how this all works. We had great balanced, clear, non-smelly water. That was until about 2 days ago. We had some friends over, wine, cigars, etc, and now the water looks and smells like our old turtle tank (if you've ever had turtles you'll know exactly what I mean). Just a disgusting smell. I don't think anything was spilled into the tub, but I wonder if maybe a little wine would kill the water that quick?
I just cleaned out the filthy filthy filter (never seen it that dirty yet) dumped 500 ml HP in, but to no avail.
Ph was a bit low, but now adjusted.
Any ideas? suggestions?

Bill Clarke said...

Hey Marty,
I suspect the dirty filter is the culprit and you may not have succeeded at getting it as clean as possible - in which case your H2O2 is getting used up dealing with the matter left on the filter. If you check your H2O2 levels and find that they are dropping fast that would support my hypothesis. Check the filter and clean it very thoroughly or even consider replacing it, if you find you are dumping more and more H2O2 into the tub but levels continue to drop.

Anonymous said...

We are using HP in our hot tub, but cannot keep the water clear. We fill it, keep the filters clean and HP every 2 -3 days. After about 3 weeks it starts to get cloudy and we cant fix it, have to empty and refill. Any ideas?

Anonymous said...

Anonymous from above
Wondering if our HP is not good What is the shelf life of HP We bought 5 gallons about 3 months ago,could this be the problem.
Thanks

Bill Clarke said...

Properly stored (in a cool dark place) H202 should remain useable for a lot more than 3 months, unless you've accidentally introduced dust or some other contaminant. what results do you get when you test the levels with a test strip? Also, the cloudiness may be the result of a pH inbalance - check those levels as well. Further up in these comments there is a discussion of using natural products (vinegar and baking soda) to balance alkalinity and pH.

Anonymous said...

We are new to this hot tub game. We were told we could just use HP. Our test strips indicate it is about 100 out of the container. If we do have a ph imblance have never checked,do we buy chemical to correct that or use vinegar and baking soda?
Thanks for you help. This HP thing seems to be all over the map with so many variables. We have a samll tub that holds 350 gallons,which i am sure factors into the equasion.

Tina B. said...

Bill,
We've had our 450 gal. tub since early Jan 11. We have already switched the water once due to white floaty things. We also have an issue with an pinky-orange scum that forms at the water line on the tub and some on the cover as well. The tub has an ozonator. We filled with regular water from our subdivision well, but I would be very surprised if it was not chlorinated. My biggest disappointment is that I am having to add 2 cups of H2O2 2-3 times a week to maintain the 50-100ppm level. Any ideas on the orange scum? The PH balance also keeps running to the high side. Would the ozonator "use up" the H2O2 faster? Or is this simply an indication of organic material being present in the water.

Bill Clarke said...

Hi Tins - sorry things aren't going so smoothly for you. First, I agree that the municipal water in your subdivision is quite probably chlorinated. Second, if I understand what an ozonator does I don't see any potential conflict with H2O2 - an ozonator should not be introducing any biological material to the water and should co-exist quite peacefully with H2O2. To be certain, can you disable it temporarily and see if that makes a difference (though I doubt it will). Something is depleting your H2O2 at a significant rate and I am curious about these "white floaty things" and the funny-coloured "scum" you describe. Is it possible that something is making its way into the tub, falling or dripping down from the cover, perhaps? That's my best (and thus far, only) guess. Unless your subdivision is adding something to the water supply - is it possible to check that?

Marty S said...

Hey Bill,
I too have had the "white floaty things" and after dumping the water yet again for the 2nd time this month, they're back. I found I needed to add a cup of HP a day to maintain my 100ppm and it's growing cloudy again. I have a new filter and we haven't been in the tub. My ph was slightly low, I added baking soda to bring it up, but it remains cloud. No smell, but definitely not inviting. I'm losing faith, but I want this to work, the bromine was killing my skin...

Tina B. said...

According to a response I received from Robert Simpson, my orangy-pink stuff is a probably mold or bacteria...which is also likely the case for the white floating things. He suggests the #1 reason for h2o2 problems is a dirty filters. He suggests a product called Ecoone or another commercial filter cleanser. He also recommends adding h2o2 ever couple of days.

Tina B. said...

Robert also suggested:
At the 1st sign of cloudiness or levels dropping quickly, you need to shock the water with dichlor or household Javex...usually 1-2 cups will do...than in 24 hours the water should be clear...add 2 cups of h2o2 then...and you are back in business.

Hope this helps you Marty. For myself we will see if we can turn off the ozonator and try again. Stay tuned!

Tina B. said...

Bill, You were correct...the ozonator would not make a difference. According to a chemical engineer friend, the additional oxygen molecule created by the ozonator and the addl oxygen molecule of the h2o2 would both act as "free oxygen ions". I believe my filter must be the issue at this point and will admit we have not cleaned them weekly. Again, stay tuned.

Marty S said...

Hey Tina, I agree that I think the floaties are due to clogged or unclean filters. But which came first? I notice when the water starts to turn funky (even with h2o2 levels above 100ppm) the filter start gumming up with the same orangey-pinkish gunk (gotta love these technical terms...) I did the shocking with javex yesterday, and this morning the filters were so blocked up it was disgusting !!! I'm now on my 3rd clean filter, and I'm having them soak in a +/- 17% mixture h2o2. When they stop bubbling, I rinse them off again (each pleat one by one) and reinstall in the tub. The water is sure clearing up a bit, but this is unbelievably labor intensive. Not to mention I haven't been in the tub in about 10 days, as I'm nervous to know what's in it !! This is the 2nd dumping and refill of the tub in less than a month!!
I'm hoping I find out what I'm doing wrong....
BTW I'm unable to turn my ozonator on/off, it's automatically on in one of its cycles (not that I think this makes a difference..)
Marty

Anonymous said...

I would like to know if anyone has had any reactions like a rash or anything from the peroxide?

Marty S said...

I think I'll be giving up on Peroxide. I need to dump the water yet again. I'm not sure what the problem is, but the white floaties make the tub absolutely unusable. This battle has gone on too long. If anyone wants to purchase peroxide test strips (I still have 2 unused packs of 50, and about 15 left in my original container, let me know. Also, if you're in the Montreal area, I have about 25 litres left of 35% H2O2.)
I wish it worked.... It was beautiful in the beginning, and I never had any rashes from it, but now I don't use the tub anymore.....
Thanks Bill for all your help though !
Marty
mschaap@me.com

Anonymous said...

Bill,
Thanks for your blog on the H2O2. After finding it and being sick of the chemical game not to mention the dry skin etc.etc. caused by the chemicals I made the switch to H2O2. Bob hooked me up - delivery right to my door, gotta love it. I've had zero problems with the peroxide and its so easy to maintain even though someone from the family is in the tub every day of the week.
Thanks Again,
Dave

Anonymous said...

Hi Bill and fellow bloggers;
I live in the Thompson region in BC and switched to H2O2 last fall. For the first while it worked well. Since before Christmas I've had to add way more H2O2 than before and we have a problem with honey bees invading under the lid of the hot tub. We never had a problem with bees when we were using bromide, but I really don't want to go back to that. Has anyone else had a problem with honey bees in their hot tub when using H2O2? and if so, what did you do about it??

Anonymous said...

This place listed below has a funky old website but they seem to have cheap prices for 35% Hydrogen Peroxide

http://www.dfwx.com/h2o2pool.html

We haven't tried them yet, but I think we'll order a gallon from them and then give the hydrogen peroxide a whirl in our hot tub (pun intended)!

Ina said...

Hi, I am in the process of buying a hot tub and I am researching HP as the water treatment.
I was convinced that HP is the safest and simplest way to maintain a clean hot tub.
Now I heard, that the vapors of HP can create lung disease.
Have you ever heard anything about this?
Thank you,
Ina

Patrick said...

Ina,

Ozone can cause lung issues if strong enough, H2O2 is amazing. I have used it as a cancer fighter as there are several studies that show it will cure cancers. Also, there are several websites dedicated to inhaling it, getting it in an IV, drinking it, vaporizing it for lungs and the list goes on and on. The US Army used to give this to the soldiers during WWII to cure a bunch of ailments. Then big pharma purchased our government and H2O2 is now missing from all the books in the Congressional Library. (wonder who took them :P )

I am NOT a doctor, nor do I wish to make any health claims I am not qualified to make, but rest assured, there are thousands of people who know the truth about H2O2 and it's healing powers.

I wouldn't worry about using it in your tub, I would worry about using Bromine and Chlorine however. Both of those have been proven to be a harm to your health. Bromine has been proven to screw with your Thyroid as an example.

Good health!!

Bill Clarke said...

Ina and Patrick,

I have not heard or read of health problems associated with inhaling H2O2 vapours. And, like Patrick, I have read some fantastic claims for the health benefits of H2O2.

Fantastic claims that, frankly, I discount. If you listen to some people, H2O2 is a panacea for our times. I don't believe that. However I do think that, used properly, it is a safe alternative to a chlorine-based tub treatment.

As far as I know, no one who has posted here (myself included) is qualified to give medical/health advice. As always with these things - consult a medical professional if you have concerns.

Patrick said...

Bill,

For the first time, we used H2O2 in our tub yesterday after a good cleaning. We filled the tup, cleaned the filters and then ran it for a bit, dumped it and started over (in part to me NOT rinsing the filters off from the filter cleaner my wife used, making the tub a bubble bath from hell).

The tub seems wonderful except for one thing I don't understand. The surface of our tub seems rough, or etched and slightly scratchy when sitting in it. Before it was smooth. I can't imagine 2 cups of h202 will harm the surface in anyway, but I am at a loss as to what this could be.

Any ideas? I was thinking calcium, but not sure. We are using city water (slightly green when you fill the tub at the start) and treated it with 2 cups of h202. I am not to worried about the PH as we will be using a colloidal silver tub treatment that will keep all bacteria away with the silver.

Thanks in advance for your time Bill!!

Bill Clarke said...

Hey Patrick,

Yes, calcium could be the culprit - do you use a water softener? Living in an area with hard water I always tried to mix half softened water with half unsoftened water when filling my tub - to avoid calcium buildup.

Another thought though is the "bubble bath from hell" experience - is it possible that you didn't get the foam from the filter cleaner completely off of the surface before re-filling? That might account for 'rough' feeling of the surface.

Patrick said...

To be very honest, I didn't re-clean the tub after the bubble bath.

As for softened water, we use one of those electronic softeners (the ones that have wires wrapped around the pipe and use electricity to alter the surface tension of the minerals in the water without using salt).

I think we can live with it at this point. My wife was worried that since I had this idea to get rid of chemicals in our tub, I somehow may have damaged the tub surface. I don't think I did. Nothing I am using would harm the surface in my opinion.

I will keep you posted, thanks for the ideas.

Anonymous said...

Hey Bill, Thanks so much for the information you've posted here. I suddenly developed an alergy to chemicals and couldn't use our hot tub so I began searching the internet for alternatives and behold, I found your blog. We converted our tub March 2011 and haven't had a problem since. We completely drained the tub and refilled it with city water supply (very high chlorination), added a full quart of 35% food grade (couldn't find tech grade in my city) and let it sit for a few days. We also replaced our Ionizer for the tub. We have since to have any issue at all with ph or hardness and I can hot tub all I want. We found that the pool supply stores have a line called Baquacil that is 17% peroxide so we bought their test strips ($5 US for 50 strips) Everything tests perfectly since. Again, thank you so much for your sharing the information. To those reading my post, remember we installed a new Ionizer on our tub at the same time. We haven't had to drain the water since as it stays perfectly clean, ph perfect too. Skin is extremely smooth after a dip!!!!

Rob

Bill Clarke said...

Rob,

Good info - thanks. You've had the kind of positive experience with the switch-over that my family enjoyed - good to hear!

Bill.

Anonymous said...

Thank you for this. I think it's informative for people. Hot Tub Chemicals

Mark said...

Hi Bill, great site, lots of info.

I have recently switched to hp as well. It has been about six weeks and things have been great up until now.
Although my water is sparkling clear there is a bit of an oily film on top and it is starting to smell a little musty.
If you have any ideas I would appreciate it.

Thanks,

Mark from B.C.

Hot Tubs said...

Tons of great information on keeping hot tubs clean and safe to use. Hot tubs do need maintenance, but in the end they're worth it!

Krysta said...

We discovered 35% hydrogen peroxide after my fiance began having skin irritation from the chlorine we were using in our spa. After an extensive online investigation of chlorine/bromine alternatives, we decided to give hydrogen peroxide a try. It was one of the best decisions we have made and we've had two years now of clean spa fun:) In fact, after discovering all the benefits and uses of hydrogen peroxide, we have built a business around it. We found it difficult and expensive to obtain and set out to change that. We offer local pick-up/ delivery to the greater Seattle and surrounding areas and would love to help anyone looking for a good source or information on 35% FG hydrogen peroxide. Happy hot tubbing!
www.Hydrogen2o2.com

Anonymous said...

Jsut switched over to Peroxide. Loving the Soft bubbles.
Enderby, B.C.

Anonymous said...

Well we are on day 6 of the switch:) We use our tub twice a day. Our filters have been amazingly clean which tells me that the peroxide is doing a much better job than the chlorine / Carefree product ever did. We have only had to add peroxide once and the levels are staying at 100-120.
VERY HAPPY HOT TUBBERS
Enderby, BC

Anonymous said...

I am curious about not using h202 with well water? We've run our 24' round pool and now the last 3 years our on ground 16x24 pool with 35% h202 with little to no problems ;-) While I use distilled water with food grade perxoide for internal h202 therapy, I didn't worry about the well water and h202 combo in the pool.... The first few years we had a couple small algae bars as well as the h202 but it appears we couldn't get them last season so we went without ;-( We use the test strips as well. We did try ozone for a few years as I had a medical grade ozone machine and although it worked amazingly- it was not a stand alone product and the algae still had to be dealt with - back then they didn't have the algae bars. Anyhow, was just curious to know why it wouldn't work with well water (and ours is very hard at about 24) . thanks, Wendy in Ontario

Anonymous said...

The problem is that algae is biological and its presence will deplete your H2O2 faster than would happen in its absence. It CAN work but you will end up replenishing your H2O2 more frequently.

Caroline said...

I want to make the plunge and change my hot tub treatment from Clearwater blue to H2O2. Does anyone know where I can get technical grade H2O2 and/or test strips in the Vancouver area?

Thanks,

Anonymous said...

Hi I'm from Australia and I have a fibreglass spa, are these the same as your hot tubs and am I able to use the H202 in it. My PH was so red (high) my test kit didn't give a reading. We use liquid drops to test the PH. Also would vinegar and carb soda work. I have put 2 lost of PH decreaser in and run for two hour between each dose and it hasn't altered the reading as yet. Thanks

MOJADA said...

Hi Mate,
Thanks for your article.. and blog it is very imformative..
i am trying to find some 35% hydrogen pyrixide here in los angeles, but in the meantime, i emptied my fiberglass hot tub, probably regular size and refilled with municipal water from the tap..

i added some 3% hydrogen pyroxide in the meantime and found that the water was very clear and felt amazing.. although a day later i have found a kind of crusting in the tub under the water on the fiberglass and all the jets etc.. kind of like a saltish crusting?? it was removable by scrubbing with a spounge..

not sure what this is, ? do you have any idea, and suggestions on what i should do?

it seems strange that a solution of only 3% (household hydrogen pyroxide) would have much of an effect at all?

thanks so much for your help
marco
saltwaterdream@yahoo.com

Luciano said...

Good day Bill
I have changed my tub over to hydrogen peroxide a week ago. Cleaning filter daily, checking ph and alkalinity levels. Lowered ph, two days ago with the ph lower I normally use. Water turned cloudy, having a hard time to clear up the water. Maybe it was the ph lower I used? Read vinager will lower ph, on your blog, maybe that is where I went wrong? Any suggestions?
Luciano (Burlington)

Robert Simpson said...

Hi Bill
I have found a good solution to cloudy water, smelly water,etc. Use either liquid chlorine-Javex or similar or DiChlor-granular pool shock plus a floc. This quickly kills the bacteria responsible. Be sure to clean the filters every few hours after adding this treatment as they will plug up quickly. May require several litres of Javex or a few oz. of DiChlor. If still cloudy increase dosage or switch up to DiChlor-it will clear up with sufficient dosage, even if water has been in tub 6 months! with Can also use a little every week or so to prevent problems. Leave tub top open to vent off chlorine fumes and add more h2o2 as soon as water clears(12-24 hr)
Happy tubbing!
Bob Simpson
superfastsolutions.com

Jody said...

Sorry if this has been answered already - still need to read all the comments. We have well water and we're looking for a less toxic method for sanitizing our hot tub. What if we added some chorine when we first filled it and then after that dissipated, continue with the h2o2? Would that do the same thing as having city water with chlorine in it? Also we have a small tub (only about 225 gallons) so we're willing to change the water often. Thanks!

Xland said...

Bill
We had a company maintaining our tub for the past 18 months, they use HP and a mineral/pumice bag that stays in the bottom of the tub. We loved the water quality But then the breaker tripped. Our separate maintenance repair person when he heard we were using HP said he knew right away what the problem was- corrosion of the non-stainless steel components and contacts on our heater. When he arrived that was exactly the issue.
He claims HP under higher heat (Spa)creates this problem and it will happen to every tub heater within a 6-18 months. Have you heard or this?

Anonymous said...

I've read to circulate the hot tub water after adding the peroxide to shock the tub, but can't find anything regarding whether to have the heat on or not?

Anonymous said...

Hi the first thing one needs to do is to search the web and you'll find all the benefits of H2O2. the healing properties that have been recorded since 1882 will surprise you. cancer arthritis ++++++++++++++++++++++++++++++++++++++ really.
If you really want to keep your tub clean use a ozone generator. They are cheap and easy to install. Then you families can reap all the benefits. You can actually make your hot tub into a spa that people pay big bucks for by adding in magnesium and baking soda.
Search the net it’s all out there.

Anonymous said...

Hi Bill - we have excellent quality water from a deep well (an outfit down the road bottles and sells it as natural spring water) and yet I would like to try HP. You mention there could be a problem with algae if the water is not chlorinated first - couldn't I just shock the water with chlorine when the tub is first filled and then continue with your recommended HP treatment? I would have thought that even the chlorine in municipally treated water would eventually gas out...

Thanks

Dale in Manitoba

Anonymous said...

Glad to see so much interest in using hydrogen peroxide in water treatment. However I feel the need to correct some gross misstatements of people who might be soft in their science facts. Hydrogen Peroxide Kills Algae, as does chlorine. Both are used up and need to be continually added. Absurd to think that a 1x chlorination treatment of water is going to prevent algae forever, or that it is necessary to chlorinate water prior to using hydrogen peroxide. People who have ornamental show ponds and water features use hydrogen peroxide to control their algae!!! Hydrogen peroxide is h2o3, it can only break down to water and oxygen, chlorine breaks down into a slew of chemical compounds. If you are blessed enough to have well water don't sully it with a chlorine pretreatment. Happy in my pool and hot tub, all chlorine free and sourced from the well.

Anonymous said...

I had a 1993 Sundance Capri for 15 years and used 35% hydrogen peroxide
successfully in the ozonated filtered spa. One cup to shock it and 1/2 cup
weekly for maintenence.

Recently I bought a 2012 Sundance Camden with coolray filtration and I
have not been able to get the pH right no matter how much 35% hydrogen
peroxide I use, the pH test strips measure 50ppm or higher immediately
after adding the 35% hydrogen peroxide but the next day the pH strip
doesn't measure any ppm and I'm adding one cup of 35% hydrogen peroxide
every day.

Sundance claims that 35% hydrogen peroxide can damage their spas and will
void the warranty, I don't want that to happen and I don't want to have to
begin using chlorine.

Anybody have any ideas and if someone knows that the coolray filtration is
a deal breaker for 35% hydrogen peroxide, for instance it is neutralizing
it somehow, then let me know what spa manufacturers and models you know
that are ok with 35% hydrogen peroxide for bacterial control.

Anonymous said...

Bill, why has my hot tub been cloudy in colour lately? It wasn't for the longest time, but has been for about 2 weeks. We've added hp, but it is not coming back to 50-100ppm. Kindly advise.

Pat in Red Deer, Alberta

Anonymous said...

I was just looking for some info for my brother of whom I just converted to peroxide.
You have some good info here Bill. But...

I live in the country and we are on a well. Water that comes chlorinated does not stay chlorinated. It burns off or evaporates. In order to use peroxide you need another oxidizer. We use ozone. You can by the machine online and its an easy install. I ordered my tub with it.

The water quality as far as wether its soft or hard is more of an issue. When I change the water in my tub I use half directly from the well and half from the softener (house).

I have had a tub for over 10 years using Peroxide. So easy. No issues. Change the filter(s) more often. Enjoy

I have converted many tubs (friends).. lots of them on wells. No problems.

Thanks

Anonymous said...

You can shock with Chlorine - as the H202 will take it straight back out of the solution once the chlorine has dealt with organics etc.,

Anonymous said...

We switched our hot tub over to peroxide a week or so ago. We now have a very fine, white, gritty film on the whole inside of the hot tub. If you rub it moves around but settles again. Any ideas on what it is and how to get rid of it? Also, I have been in hot tubs before with peroxide and have had no problems but after getting out of ours on the weekend, my legs and feet were so itchy I could hardly stand it. Didn't effect my husband that way at all. I had to shower and put cooling lotion on and eventually it went away. Any suggestions on what that was?

Unknown said...

We have a coast bahama hot tub. We live in the country and have water from our well or rain water. We would like to use hydrogen peroxide in our tub. Can't we just add chlorine to the water we fill our tub with and then use h202 for the remaining months untill we switch water again ?

Unknown said...

The need which you have mentioned for Hot-Tub to hydrogen peroxide is very informative. Thanks for sharing this post.
Spa Filters Replacement Cartridges

Anonymous said...

Will in Alberta,
Bill you ever get a new tub?

Bill said...

Bill, while I have looked at most of the postings, I'll admit that I have not looked at ALL the postings. However, there seems to be some misunderstandings that I would like to help clear up.

1. Yes, you can add chlorine (and should). However, if you are using H2O2 then you should be able to keep the free chlorine concentration down around 3 ppm. At that level you should NOT experience any of the annoying effects of chlorine. If you don't use chlorine or bromine then you will likely have to use unreasonable quantities of peroxide.

2. You still need to maintain pH. It should be maintained around 7.4 +/- 0.4.

3. You still need to maintain alkalinity around 100 ppm (important for being able to maintain pH).

4. Calcium should be maintained around 100 to 250 ppm for most spa's.

5. Besides giving you clear water, you need to maintain these to allow your spa to last awhile. A pH that is way off my be quite disturbing to you skin but it is also very disturbing to the hardware in your spa. High calcium give you scale and low calcium with destroy the metal part in you spa (such as the very expensive pump).

Thanks Bill, you have a great site!

Unknown said...

Thanks Bill. Great to hear from another Kitchener native :)

Have you (or anyone on here) tried using hydrogen peroxide with an ionizer? We have a ClearBlue, but still need to use a bit of chlorine. Curious whether we can replace the chlorine with HP.

Anonymous said...

Hi Bill,

I converted my hot tub to HP and have been very happy with the experience. I recently did something dumb and added too much HP and now the water is at 200 PPM. I read that it was safe to use but I believe it caused me increased pain the next day. I wonder what is the best way to reduce the PPM to 100? Would draining half the water and refilling be the only way?

Sheila said...

Hi Bill,

We have a hot tub that wasn't maintained properly and it got some white gummy substance on the bottom of it. Could that be this bio film I have read about? Do you know anything about that? My tub was on bromine and I have switched it to chlorine to get rid of this substance. I have also been using this ahh-some cleaner. Anyone familiar with any of this?

Unknown said...

Hydrogen peroxide will completely neutralize chlorine. Just 1 tablespoon of 35% peroxide will remove 7 ppm of chlorine and all chloromines from a 550 gallon tub.. I can't believe nobody has posted this important fact..

Matthew Wiecha said...

Spent 30min reading all the comments.I'm about to buy a new Arctic Spa and want to use HP.Does it corrode/ruin the gaskets/components prematurely?Please advise,thanks.

Jim said...

Hi Bill. We were using Spa Marvel water treatment and decided to try hydrogen peroxide. We filled our hot tub in Sept. with two brand new sets of filters. after we filled our hot tub, we added 2 cups of peroxide to shock it. Stayed nice and clear for about a couple weeks then turned cloudy and a stale smell. Thought we were doing something wrong, emptied the tub and started from square one again. After a couple a weeks it turns cloudy again and we can't add enough peroxide to even register on the test strip. We two sets of filter that are brand new and change them regularly. What are we doing wrong because we want to get away from chemicals if at all possible, but don't want to have to drain the tub ever month. Oh and by the way, we are on city water. Thanks, Jim.

Unknown said...

Forget about peroxide.. It's no damn good... Use Nature 2 and follow the direction... It's by far the best solution, and you will never smell chlorine..

Matthew Wiecha said...

Hi Jim.I've used peroxide in my hot tub(well water)for over 10 years,early on, it got a little cloudy a few times after heavy use but I would add a few glubs(I never measured)and it would be fine.After I added a good ozonator and put in a glub(couple ounces)or two after every single use,my water stayed clear,sometimes for almost a year and I would change it, just for the sake of changing and wipeing the liner.My tub is 84by84in and once I poured in a whole bottle for the initial shock and added my couple ounces after each use and clean the filter regularly(in a peroxide solution)well, I still have my original test strips and my water stays clear.Finally,it's been more like 13yrs.and no one is answering my question regarding whether peroxide ruins,gaskets,fittings etc.as I am about to buy a bigger,better tub.My experience is"no"but still wondering???

Bert said...

I am new to this blog site, but not new to using peroxide in our tub...it works great with no smell or cloudiness. We've used it now for about 3 years...the only issue is this: since we have started using peroxide, we need to top our water up every second day or so...our tub is located inside on concrete in an alcove. Three sides of skirting have been removed to accommodate the installation & a ledge now surrounds the tub just below the outside lip...this means we have a crawl space virtually around the tub. There is no sign whatsoever of any leaking, etc. but we lose about 2" of water per day. Our tub is a smaller unit that was designed to fit through a 3' doorway, because of this, 2" of water creates a problem with the suction through the filter. Has anyone heard of this before? Is it possible the peroxide is oxidizing the water? There is no sign of moisture on the walls surrounding the unit either.

Anonymous said...

Hi! We've just started on hp 2 weeks ago for crazy chlorine sensitivity. Love the experience so far, still learning how to manage it. The water turns cloudy yesterday, still trying to treat it. We didnt put any hp in the water for 3 days, as the reading were ok, and now the water are cloudy. I will certajnly never do that again! Added 2 cups of hp and a clarifier yesterday. Today addedhalf a cup and ow waiting....

King Kong said...

I have read quite a few of the posts in this forum and have learned that no one in here really knows how to use H2O2 in their hot tub. First of all you do not need to start with chlorinated water. Secondly, if you do not use a monopersulfate compound along with the H2O2 you will be having to drain your tub and start over every 4 to 6 weeks. I use "Oxy-Sparkle" that I can buy at Canadian Tire. It is a chlorine free shock treatment that I throw in about a quarter cup every 2 weeks, and I can keep my water perfectly clear indefinately. My wife and I both are alergic to chlorine and have been using H2O2 for 8 years now and love itKing Kong

Unknown said...

We started using 35% H202 in the fall and loved it. After changing the water we shocked it with 2 cups and found we only had to add a cup of H202 a week until it really got cold outside.down to -28 at times. We still use the tub but I have to add about 2 cups every other day. The water is still clear and the other readings are in line.Does the cold affect the amount you have to use?
Thanks Judy

King Kong said...

Judy, the outdoor temp has no effect on the H2O2 and you are adding it to a HOT TUB, where the water temp is usually very consistent. As a matter of fact the colder and darker it is stored, the longer it will last in the strength you purchased. Use however much you need to keep the water clear, and read my previous post (just above yours) for info on what you can use to help the H2O2.

Unknown said...

Hi. I want to use H2O2 as a sanitizer along with ozone and Nature 2 in my hot tub. My question is do I still need to balance the ph and other water parameters like normal or not?

And if so, any recommendations on what to use? Thanks.

Eric

King Kong said...

Eric,I wouldn't use nature 2 along with h2o2 as it is unnecessary and don't know the reaction. I have never found a need for managing PH balance.

Anonymous said...

We started to use peroxide a few month ago and we love it. But we have problem keeping the water clear. Thanks King kong for the advice on the non-chlorine shock. We'll start using it right now and see how it turns out. Tell us everything we need to know. Everyone starting on peroxide is going in the dark. We have to try and re-try. Trials and errors. Not easy. Thanks for ur help. We r in quebec, canada.

Anonymous said...

Btw, how much peroxide are u using everyday? We found that 1cup/day was too much and 1/4 was not enough. So far, half a cup/day is the best we found to keep it clear the longer we can

Anonymous said...

Hi! Can you tell uswhat kind of peroxide u r using and what quantity? Thanks for ur help!!

King Kong said...

I am using 29% h2o2 as I cannot find 35% any more near where I live. The amount you need to use depends on, the size of the tub, how many people are using it, how often its being used, whether or not clothing is being worn, how much exposure to sunlight the water gets. The amount required will always be determined by all of these and any other contaminates introduced into the water. With my own situation, only 2 people and no clothing and using tub usually once per day I use about 2 cups a week, along with the shock I have mentioned in previous post.

Unknown said...

Hi
I am using 3% Hydrogen Peroxide (stabilized).
We are 2 people no clothing.......is this enough.
My wife is getting rashes.
What should I be using, we are also on well water.
Thx

Anonymous said...

Hello Bill, you are what the industry calls 'the buddy affect'. You have no professional experience in hot tubs. You are completely oblivious to water chemistry and are providing uneducated, self researched, pragmatic and considered dangerous information, passing it off as fact. I have been in the industry for 20 years, and work for one of the world's largest manufacturers. First off, tap water is composed of much mineral and sodium content as it leaves your tap (usually around 100-200ppm). The steam that shoots off your tub in the winter time? There is zero mineral in that water, so you will have a natural build up of salt regardless of what tub you have. (STAIN AND SCALE) You mentioned ph? ph is a measurement of acidity and used mostly with pools,(ALK) however is the actual chemistry and used with hot tubs. Why? Because the test strips are affected by the hot water and will give false positives. You had a reader mention adjusting ph and still have coughing issues? thats because they were adding in acid instead of a base. Chlorine is not used in hot tubs like it used to be, bromine (NaBr) is used most of the time. Why? It is sodium based systems that are used because they have staying power, but like all mineral based systems, they do not evaporate or leave the tub (unlike peroxide) which is all chlorine and bromine systems, say Peroxide is not legally sold in the pool and hot tub industry because it has zero staying power and gasses off almost immediately after it hits the water. You then go a full week (or however you leave the chemistry) with no chemistry in the water and open for major growth. Heavy users will have major issues with this system. Long story short, let the professionals educate customers safely instead of your pragmatic misinformation.

Matthew Wiecha said...

Anyone who doesn't have the guts to put their name behind a statement has "zero" credibility.Again,I've used peroxide for @13 years,use the tub, put a "glub" from the jug after each use,more after a party,nice clear,clean smelling water,often up to a year before I change it,a fast wipe of the shell and start over,nothing simpler or safer.So much for the bromine pedlar's statements,we'll probably see U.S. commercials,in the future,of chlorine/bromine hot tub users sueing because of health problems,this guy's safe because he's "anonymous".

King Kong said...

Matthew, I agree with you. Mr. Anonymous doesn't know what he is talking about or is simply trying to protect his industry of making money from the selling to people of known carcinogens.All anyone has to do is Google " chlorine and bromine cause cancer" and you can read forever.

Les boubou said...
This comment has been removed by the author.
Anonymous said...

I can't believe this guy is bullshitting the hydrogen peroxyde use. Why does he take the time to read the blog is he doesn't like it? Let us do what we want and thanks to mike and king kong for their help too about their use on H2O2. Very helpful. Continue your good work, all of us having to deal with chlorine allergy thank you from the bottom of our heart.

Tina said...

After reading EVERY comment here - I think I still want to switch to peroxide. I've taken notes all the way along, and think I know my next step - King Kong - I really think you're on the right track. Do you use an ozonator as well, or just the monopersulphate you mention with the H2O2. I really don't want to drain my bromine water, as it's crystal clear still. I'd just like to add the H2O2 to it. Is this a mistake? My thyroid has become compromised as a result of bromine, so I must make the switch, and sooner rather than later as we use our hot tub daily, and I'm loathe to give it up. I can purchase Food grade 35% peroxide for 110.00 for 10 liters. Is this the best price anyone knows of for Central Alberta? Appreciate any and all input. Also will be buying the test strips from indigo, but do I need any other supplies? Am anxious to change soon. Oh, also for the poor guy way up in the 2011 comments who simply gave up his hot tub because peroxide didn't work, the alternative to peroxide that I wanted to try is from thenaturalsolution.ca It's apparently an enzyme, glycerine, and purified water. I hesitate to use it myself, as I was sold bromine as a 'natural', and if I hadn't been able to research bromine as a factor in my daily life, I wouldn't have been able to actually link bromine to my thyroid problem. I've asked the owner of thenaturalsolution what his proprietary ingredient is, and 'enzymes' just doesn't cut it for me. However, for the above mentioned fellow, or others who have not had any success with peroxide and need to go away from chlorine or bromine, this MAY be an answer.

Elyse said...

I think 10 for 10 liters is good. We paid 250$ in quebec for purified 35%. Really expensive but it was worth a try. So far, it's difficult to keep the water clear after a week or so, even after the MPS added but we don't give up. We'll be buying a 27% technical grade this week. That might be better as there is a stabilizer in it. Our 35% purified was maybe too pur and destabilize over time. We'll see. We are using our spa every morning, 2 persons only.

Unknown said...

I don't think Bill understands that hydrogen peroxide is not a disinfectant. You must use a disinfectant to kill the bacteria in your tub or over time there will be many strains that are completely resistant to peroxide. As matter of fact, without using a disinfectant the bacteria will build up to levels that will build up on the filter they get so plentiful.. Peroxide is an oxidizer.. It is not a disinfectant. Period!! Use liquid 12.5 percent pool shock. 4oz every day, and by the end of the next day, the levels are so low, you will never get any irritation from it. Try it.

Unknown said...

One more thing. Peroxide may make the water look clean, but you are still bathing in swill.. It may dissolve solid waste, but the bacteria is laughing at you every time you get it your tub. I've had my water checked, and I'm not just blowing smoke out my butt....

Anonymous said...

And the debate continues, but peroxide IS a disinfectant.

Hydrogen peroxide
From Wikipedia, the free encyclopedia
Disinfectant: Hydrogen peroxide is seen as an environmentally safe alternative to chlorine-based bleaches, as it degrades to form oxygen and water. It can be used for the disinfection of various surfaces[32] and is generally recognized as safe as an antimicrobial agent by the U.S. Food and Drug Administration (FDA).[33] However studies have found it to be ineffective in certain cases and hospitals and other medical institutions are now being advised to use chlorine-based bleaches for disinfection.[34]
The main classes of antimicrobial agents are disinfectants ("nonselective antimicrobials" such as bleach), which kill a wide range of microbes on non-living surfaces to prevent the spread of illness.

Unknown said...

I'm telling you from experience that hydrogen peroxide is not the way to go. If you have approximately 500 gallons in your hot tub pour 4 ounces of unstabilized liquid bleach or pool shock which is typically 12 percent concentration into the tub in the evening when you're done using it. When you pour it in it gives you approximately 7 ppm of chlorine concentration by the next day it's down to approximately 1 ppm which is perfect because that won't irritate your skin. I understand the desire to find an alternative to chlorine but quite honestly there isn't one that works as effectively. if you want to soak in nice clean water then you'll use chlorine. If you want to be a mad scientist experiment with different chemicals you could do what Bill says to do.it really isn't very difficult in my experience has taught me that just using chlorine is sufficient. There really isn't even any need to use a non chlorine shock. Do not use powdered chlorine as that will irritate your skin. again no offense to you Bill, but what works for you doesn't usually work for others. I think that the advice that you're giving themare given with the best of intentions but the reality is you're opening up people to swimming inbacteria that the hydrogen peroxide simply won't kill. I am NOT a chemical salesman I don't work for a hot tub store but I can tell you that having owned one for a while and having tried just about everything you can think of in the end whats simple is best

King Kong said...

Richard.... you don't know what you are talking about. I very much believe you have never used it, and you do not understand what it is. Funny that people have been using it forever as a disinfectant for wounds in a very weak concentration of 3%. I can't understand why you bother being on this blog if you don't like the idea of using h2o2. People like myself have been using it for many years with great success, so whether or not it works, is not up for debate. We are here only to try and help other to know how to use it successfully.
Tina, if I were you I would drain the water and start again, even tho I really don't know if that is neccessary. Your price of h2o2 isn't too bad for 35%, but I think you could do better. I live in BC and I'm paying $95 for 20 liters of 29%. To one other of your comments, I have test strips for h2o2 and tried them but haven't found them useful, so now don't bother.
Elyse, your h2o2 whether 35% food grade or 29% tech grade really doesn't matter, you only have to continue to adjust how much you put in your tub. Don't be afraid to add more until you find a balance that works for you. Remember that even 3% can be poured on an open wound without hurting or harming the skin.
Remember everyone, if you are using some MSP with it and keeping your filter clean, and your water isn't staying clear and clean, then you aren't using enough h2o2.

Tina said...

Thanks King Kong...I was waiting for your reply. You don't think an ozone generator is a necessity then either? We have neighbors who have used nothing but peroxide forever, and love it. I'd like to have your contact info for peroxide - unless freight would be a killer. I'm still shopping around here also for a best price. Appreciate your input so much.

King Kong said...

Tina... I have no experience with the use of ozone so I cannot comment. As to shipping of h2o2, forget it, I have looked into that and its too expensive.

Matthew Wiecha said...

I am not trying to be funny,because really this is a serious matter.After reading Mr.Hameroff's comments I have donated yet another $20 to The Cancer Society in the hopes that they'll be able to help him and his family in 10-20 years after soaking in all those carcinogenic chemicals.When and if canvassers come to collect for a fund for those that are stubborn and have tunnel vision,I'll donate to that too.

Unknown said...

I am an auto mechanic. If some carcinogenic chemical is gonna kill me, it wont be 1 ppm of Chlorine from my hot tub :-) Thanks for your concern though..

Elyse said...

Btw, I'v been using hydrogen peroxyde stuff for my contact lenses for almost 10 years now. 3% peroxyde hydrogen. It cleanses and it desinfect. If peroxyde wouldn't have been a desinfectant, I would have a problem. It clearly says on the bottle: DESINFECTANT. If it's good for my eyes, I guess it's good for my hot tub...

Anonymous said...

Hi Love your site... We are in Chateauguay Qc and have switched to peroxide in Feb.. What a difference!
]I will never go back to chemical. Question though we have very hard water and use the tub nearly every day in the colder months, and close it for the summer. I ma noticing with the warmer weather that my water is clouding and a hint of green. My ph is always high so i have to monitor the ph but I had the same issue before with chlorine and bromine, IS there a safe way to fix this. We empty the tub half about every month and total drain every 10 weeks or so.

Anonymous said...

PS for the 20 Years experience me]an in the industry. We buy our preoxide at Trevi pool which is one of the biggest if not the biggest supplier of pool spa and in Quebec.

Anonymous said...

Hi there. I've been using peroxide for a few years now no issue with water. But my question is does any one have tips on cleaning the filters??

King Kong said...

This for "Chateauguay",
If you are using enough, 29% or 35% h2o2 should never have to dump your water and put in new. The only new water you will put in your tub will be to replace what is lost by leakage or evaporation. You also don't need to worry about your PH balance. If want to ensure this clean water it also helps to use a little " monopersulfate compound" which you can buy at Canadian tire and it is called "Oxy-Sparkle". It is a non-chlorine, non-bromine shock....1/4 cup every other week

Elyse said...

For those in Québec,

we bought our spa in trevi and we never heard of any peroxide there. Just wanting to change to lithium only was a big thing. The stupid student behind the counter don't know anything. But back on peroxide, We found some at Sany, 27% technical. But we just can't keep our water clear and we don't know why. We are using our spa almost everyday. Few weeks ago, we were oblige to go back to chlorine but my dear husband can't come with me in the spa anymore. Chlorine is killing his skin! But we don't give up on peroxide, we are ready to try again. We tried with the MPS every other week, no success.
For the other guy in Québec with green water, have you try to use a bit of secure 4 from Trevi? it's for the metal that can be in the water. Greenish might indicate a presence of a kind of metal.
BTW, we are in Joliette. Chateauguay, here is my e-mail, eric_elyse@yahoo.ca i can give you my phone number so I can have more info. We are very desparate! We tought about selling our tub but we love it too much!! I saved our crapy winter!

Elyse said...

So I called to trevi chateauguay and found out the peroxide they are using. It seems its a local trevi, as they are private retailer, that is why I can't find it here. The girl is suppose to send me the technical sheet with that by e-mail. Can't wait to try it. I'll go at chateauguay if needed!!!

King Kong said...

I am finding this quite comical, that people who are having trouble with their use of h2o2 are not bothering to listen to someone who has used it for a long time and knows what to do. I'll say this once more, if you are having trouble keeping your water clear and clean you are NOT USING ENOUGH H2O2 !!

There is also the possibility that the seller of the h2o2 is watering it down. I had that problem here in BC from 2 different suppliers. I now test any that I buy, by pouring some on my fingers and waiting for a minute or so to see if my skin turns white. If it doesn't then it has been watered down and you will never keep your tub clean with a normal amount.k

Elyse said...

King King, we tried everything we can. We even tried 1 cup/day and it turns milky. We tried with 1/4 per day, no success, 1/2cup per day, no success, tried with the mps, no success. Sometime, we would put 2-3 cups in one shot and it would make it worst even. We tried everything we thought. And believe me, when I sprinkled peroxide on my skin, it hurt and turns white. We tried to manage the level with the strips, it was a disaster, as if the strips were not telling the reality of the peroxide in the water. To this point, we don't know what to try anymore. The place we called today said they are using 1 cup/week. We are lost, really, don't know what to think. We are perfectly cleaning filters every weeks. Now, we think maybe it's the primary water from the city we put in that had a problem from the start. We really tried everything suggestion people are giving us.

Unknown said...

Use 4oz of liquid pool chlorine per day, and be done with it. By the next day, the chlorine level is so low, it will not bother you in the least..

King Kong said...

Elyse,
Over the years I too have had some problems with my water clarity. I've had brown water from the municipality during the snow melt season, I've added water from my hot water tank that turned the water brown and added into the tub scummy brown particles, I've used too little h2o2 and had my water turn skunky in 1 week after changing it, and I could go on.
But the one thing that has remained consistent is that if you add enough h2o2 it will clean up and clear any problem.!!
Don't be afraid to add lots. If it was me I would add at least 2 litres immediately.
I have done some calculating and in order for me to produce a 3% mix of h2o2 in my 300 gallon hot tub, (which is the strength of what we buy in the pharmacy) I would need to add 9 gallons of h2o2, and we all know that that will not hurt you. So don't be afraid to add.

ps: how many gallons is your tub and how many people are using it and how clean are they ( oils and creams and such), and wearing clothing or not?k

Elyse said...

I have a 1600 liters spa, around 400 gallons I imagine, we r 2 peoples using the spa everyday, and we don't put cream and oils, we r wearing clothes. Once, we filled the tub with brand new water, put 1 cup everyday and after 3 days, it became cloudy. we put a liter in it and it became worst. So at that point, we thought that putting too much of peroxide might clouds the water too. One thing you make me think of is that with the crapy and cold winter we had here and that we had to change the water every month at least to have clear water, we had to put only hot water so we basically empty our hot tank water. We didn't had any residu in the spa because of that but maybe there was something in the hot water that prevent peroxide to work fine. Don't know what it could be but i'm thinking of all the possible possibilities

Anonymous said...

For everyone jumping on the hydrogen peroxide bandwagon, I've been reading through the comments and the reason why you're getting cloudy water, and people are getting coughs from this is because Hydrogen Peroxide is not an appropriate sanitizer for hot tubs. It dissipates too quickly to kill bacteria, hence your water is not balanced and bacteria grows.

It is illegal in Canada for hot tub dealers to sell Hydrogen Peroxide as a sanitizer. Only chlorine and bromine are approved sanitizers by the Canadian Government. If your local hot tub store is selling you anything other than these products, please beware.

King Kong said...

Elyse,
You are going to have to add a bunch of h2o2 . I know for sure the water will clean up. Add couple litres and give it a day, if still not clear add a couple more.You have nothing to lose and it will not hurt anything.

Elyse said...

Hello anonymous,
it is not illegal in canada for hot tub dealder to sell peroxide for spa. There is a new company we just heard about called Safia, europeen product now just in québec, seeling peroxide stuff for spa. They are now selling in spa dealer too. One of our friends working in spas maintenance will be converting his spas into that too really soon. Maybe for public spa it is illegal, not sure even. Could be that there is not enough, that could make a lot of sens

Elyse said...

And thanks King Kong for your advise, I'll try it for sure soon. We have to change the water and go back to peroxide for a try.

Elyse said...

So we finally found a pool and spa plac 45 minutes from home that have been treating spa for 3 years. So idea why we never heard about them before. After analysing our water, she said the peroxyde couldnt work in our water, as the ph is at 8.4, and peroxide works a 6.8-7.4. So we are hoping the best now. This is probably why it works for some, not for others.

King Kong said...

Elyse,
This new information you have learned may be the key for many people if controlling the PH works. I have never had the problem that some of you have had and I have never bothered being concerned with PH balance. But it may be that I am just lucky on that.
I don't remember if you had said if your water is municipal or not.
If this ends up proving to be a solution to your problem it may help many and will teach people like me another aspect to the use of h2o2.

Thank you , Craig

Elyse said...

If it does work, I'll write down here everything they told me so it can help others who does have problems. Hope it works! I'll be back in a few weeks with more results.

Elyse said...

So far, peroxide has been working really great!! We r sooo happy!! Here what we've been told: ph as to be around 7. Alkalinity around 80. That is why ours never works, our ph was over 8. Also, once a week, we put half a teaspoon of quartz powder. We mix it in a bucket with spa water, put it back in the spa, lightly shake the water, no jets, and let it stand for 2 hours, without the jets. That will gets all the unfiltrable particules together. When you start with fresh water, put 2 cups of 29% peroxide and then, once a week, you had around 1 cup. Use the strip and keep it in the black, which mean around 90-100ppm. If it goes down, had a bit.
Now, we want to try in the next weeks with the local clear solution instead of the quartz powder, which is quite expensive. We'll see what it does. For those in Québec, try to find dealer that sells Safia stuff, check their website. We bought our peroxide at sany, 5 gallons of 27% for 80$. We went at Piscines Rive-Nord in Terrebonne. There was a girl there, melissa. She knows what she is talking about! She is the one who told us why our peroxide didn't work. Now, we are happy spa owner again and can enjoy it every morning with our coffee!!!

King Kong said...

good info Elyse. I have been using a product from Canadian tire called " Spa Aquarius - Clear It" which does what you were describing. Cost is about $9 per 500 ml bottle.

Elyse said...

King Kong, how often do you use the Clear?
And we bought a Scumbug to float on the water to get all the body oil. Seems to work great.

King Kong said...

Elyse, I use the Clear it about once every 2 weeks. Quite often less than that, but what reminds me is my water will start to get a little bit cloudy, then I remember and add some.
Just as a reminder to all people out there, that if the routine amount of h2o2 that they are using, is not keeping their water clean and clear, do not be be afraid to add more. It will not hurt tub or skin.
Since you have shared with us the importance of the PH balance of the water, I have been watching that and I think it has helped my water to be even clearer.

Matthew Wiecha said...

Hello everyone,King Kong,I need your advice,my new hot tub is being delivered tomorrow,again,I've used peroxide for 13+ years with great success but was very interested when you mentioned Oxy Sparkle awhile back and lately you're talking about Spa Aquarius-Clear It.So,could you take a minute to give me your best advice as to what I can add and the quantity, to help work with the peroxide.Thanks.

King Kong said...

Matthew,
I may have been a bit confusing.
I use 3 things;
1) h2o2 - my tub is 250 gallons and I use about 2 cups per week
2) Oxy Sparkle- 1/4 cup every other week
3) Clear It- 1/4 cup every once in a while to clear fine particles
that might be getting through the filter
And now I am also keeping an eye on the PH levels in which case most people would need a PH down liquid as well.

Anonymous said...

King Kong - I bought an above the ground 5,000 gallon pool about a month ago. I set it up, poured a gallon of 35% hydrogen peroxide into the water and it has been crystal clear ever since. The hydro peroxide levels are between 30 - 50. I'm thinking I'll add a little more tonight just because I saw a little white scummy thing floating on the water (though it could be that I forgot to cover the pool last night). People are telling me I need to do more and different chemicals???? I don't measure anything else (eg PH). Am I killing my kids??? Lol!
- sunny

King Kong said...

I have never used h2o2 in a pool situation, only hot tub. If you can measure the h2o2 levels as you say, that is certainly not very high and you would not need to be afraid to add more. I assume that the temperature of the water is much cooler than a hot tub, so the h2o2 will last much longer in a pool as heat is one of the things that speeds up the breakdown of it. Sunlight also breaks h2o2 down, so the more it is covered the better. You can always tell visually if the pool needs more h2o2 as the water will start to become a bit cloudy and get progressively worse looking until more is added. You can add the the same other chemicals as I have previously mention ed for hot tub and they will assist the h2o2 keep the water clean.Read back in all the older postings here for the details.

What area do you live and from who and how much are you able to still buy 35% h2o2... I would love to be able to still buy it as I have only been able to find 29% where I live.

Gail said...

How long after dipping test strip in spa water do you need to wait to get an accurate reading?

Zspas Arun said...

Hottubsuppliers UK Dealership Of Luxury Zspas Zen Spas Hot Tubs Order From The Range Or Design Your Own Hot Tub Deposit Only £299 Delivery From £150.
Hottubsuppliers UK Dealership Of Luxury Zspas & Zen Spas Hot Tubs With USA Balboa Systems. Order From Range Or Design Your Own Hot Tub.

Gail said...

Gail here again, we bought a new spa and are using peroxide, it has been 2 months. We had foam, white floaties and Orange scum, test strips are always black and we only add 1/3 c every Sunday. . PH levels high so added PH Down, used foam away and oxy sparkle. We clean filters regularly, there are always hard white stuff in it. The sides of spa are rough with a coating that can be rubbed away, but it returns. Silver jets are coated in this substance too. We are two adults, no bathing suits using spa every day. The water is clear until we turn on jets, then foam, floaties and water is milky. Two questions: what cld be causing this hard film and why is peroxide level so high.. Also why is PH level so high. Loving the no smell but need these issues resolved. thanks for any advice.
Gail

King Kong said...

Gail... from all the info that is available on this blog I don't know how you could think that 1/3 cup of h2o2 per week could possible be enough. I personally do not believe that the 100 parts per million test strips have any value for hot tubs. The amount of h2o2 needed to keep a tub clean is greater than 100 so the strips are useless.

Unknown said...

Eco Liquid Oxygen Inc.
I will post answers to all.

Unknown said...

Back ground
35 years experience in the water industry
Alberta Environment for water
Water well driller
And owner of Eco Liquid Oxygen Inc. Suppliers
Of 35% H202 food grade.
We supply to all of alberta to health food stores.
And also supply direct to hot tub and farm application customers.

Unknown said...

1. It does not matter where you obtain your water from.
Of coarse city water that has been chlorinated or treated by some means is a nice start.
( other than the fact we don't want to be sitting in chlorinated water ). So we will get rid of that also
As we want to enjoy a natural spa not sit in chlorinated water and for the love God let's not
Start adding a bunch of chemicals to a hot tub!
Our body is our biggest organ , chlorine was invented in world war one to kill the enemy as germ warfare , ran out of that use so let's let the general public use it for everything.so let's fill your hot tub up with it and soak it in and breath the fumes and stink like a chemical factory and have nice blood shot eyes.Oh and let's ruin your gold wile the chlorine slowly wrecks it..Hot tub companies make a fortune off of chemicals to the tune of one store I know 30k a month.
Do you really think they want you to use H202?
Thus they won't even talk to me .
One product or let's sell you 30 products
And hope you you don't have the foggiest idea of what your doing so they can sell you more to control the mess you have going.
I'm not a tree hugger either incase a hot tub company throws a comment in.
Oh and I will deal with the SHAM
British Columbia people are facing only being able to purchase 29% H202.
What a joke .
Apparently they want to fly under the radar so they have told every store they supply " new government
Rule".!!
Her is the truth they don't need to keep track who they sell to . That's it.
My company is going to be Expanding to BC.
I have checked with the BC government
Yup 35% is still maximum % to sell.
Not 29 %.
And it's more expensive than my 35%.
Other thing I will touch on
Tech grade food grade.
Food grade is just a higher purer grade than tech grade.
Hot tub sure why not pick whatever.
It's like pure olive oil to tiger brand 99 cent cooking oil.but for a hot tub I would say it doesn't matter
But get 35%.
95% h2o2 is rocket fuel .
Apparently some idiot in the government
Thinks someone is going to use anything over 35%
To bring it back up to 95% turn into evil doc. And destroy the world.
Next post everything you need to know
From start up with h202 to maintaining
To fixing a foul musty mess without changing
The hot tub Water.
Maybe I should ask first
Has everyone got there h202 hot tub issues fixed?
Maybe it's all been resolved .
Don't want to waist my time if they are all fixed
So post if you want to hear.
There has been some good posts in here
And some off the wall.
For how to have clear water all the time
King Kong is definitely doing it right
But I can probably build on his comments

Unknown said...

Just a note was doing this on a new android phone
And I do see spelling mistakes lol.
I promise to give you a crystal clear hot tub experience, dammit Jim I'm a hot tub expert ( h202)
Not a English teacher :)

Hectic Life said...

Thanks for your blog Bill! Can't believe it's been going so long. I'm a San Diego California H2O2 lover and I'd like to add some insight: H2O2 is WATER with an extra Oxygen molecule- it does AMAZING things for your health and it's EXCELLENT to bathe in it! That said, it's detoxing your body, so even at the low levels in the Spa, a lot of that extra gunk stuck in your LARGEST ORGAN (your Skin) is filtering out while you relax! KEEP IT UP! DON'T ADD DANGEROUS CHEMICALS! DO your RESEARCH! I strongly believe most people should be drinking it! (diluted 35% FOOD grade- DO your research!)Anyway, that ugly 'orange foam and 'white floaties' are coming from YOU. It may be shampoo, conditioner, lotion, detergent left in your swimsuit, OR toxic gunk that your oxygenated body is filtering out with the help of H2O2. I am not a doctor, just a true believer in using God's solutions rather than man-made, wealth-draining, life-threatening, CHEMICALS! H2O2 and Coconut Oil can basically change your health! I just finished a book called 'Coming Clean' It's a Step by Step 28 day guide to SIMPLE changes with GREAT REWARDS! Living at the beach helps too- IMO =)

Anonymous said...

We are new to the H202 thing for our hottub &live in south Louisiana. Also having a hard time finding info due to the chemocal industry wanting to make money. It is not easy to find but we are so happy that i no longer have rashes,we want to make it work! We just replaced our ozonator,so it is working & helps, but then the H202 seems to break down immediately (or overnight). We have barely used the hot tub but it still dissipates so quickly-to keep it at 100ppm would be cosr prohibitive. Is there anything else we can try to make it stay at a safe level? Could it be our filters? We add bleach,rinse them & then sun dry. Could there still be enough on them to break down the H202, such as manganese (our city water supply is high in it) Any ideas appreciated!

King Kong said...

The first thing that you need to do is go back to the beginning of this blog and read every post. Don't be lazy. There is a wealth of info, not only about peoples troubles, but about how to solve them. If after you have followed these solutions, you still have problems, by all means post it and many here will try to help you.

«Oldest ‹Older   1 – 200 of 276   Newer› Newest»